LGK-200 Plasma cutter Cutting Power source
- Detail
- Parameters
LGK-200 plasma cutter cutting power source
3ph 220V customized voltage CNC Plasma power CUT 200
■ High finish, precision and verticality ------------- avoid or reduce a large number of secondary processing, greatly improving production efficiency!
■ The wearing parts with long life and low cost ----- save the using cost !
■ Only need compressed air and power supply ---------achieve fine cutting of carbon steel.
■ Change the cutting process ------achieve fine cutting of stainless steel, copper, aluminum, and other metal.
| Parameter | CUT-200IGBT |
| Rated input voltage | 3~380V/415V 50/60Hz |
| Rated input capacity | 46.5KVA |
| Rated output current | 200A |
| Rated output voltage | 160V |
| Rated duty cycle | 100% |
| Open circuit voltage | 315VDC |
| Current adjust range | 40～200A |
| Quality cutting thickness(Manual type for Carbon Steel) | 1～45mm |
| Quality cutting thickness (Machine type for Carbon Steel) | 1～25mm |
| Max. cutting thickness (Carbon Steel) | 65mm |
| Plasma gas | Compressed Air |
| The working plasma gas pressure | 0.45～0.6MPa |
| Torch cooling mode | Air cooling / Water cooling |
| Arc striking mode | Non-contact |
| Insulation grade | F |
| Protection grade | IP21S |
| Dimension mm(L×W×H) | 800×380× 810 |
| NET WEIGHT | 82kg |
1, All the important parts in this plasma cutting machine like IGBT, diode, integrated circuit, relay, current and voltage regulator are world famous brand which have high reliability;
2, Soft switch technology, improve the IGBT and it`s reliability;
3, 100%(40ºC)duty cycle, it is suitable for long time, heavy load, high temperature and bad circumstances;
4, Inverter control power source: Small volume, little weight and energy saving;
5, Current up-slope function: Reduce the impact on striking arc and decrease consumption of cutting torch parts;
6, Air pressure, hydraulic pressure sensor: Protect torch from being burnt efficiently;
7, Machine type setting: Arc striking signal, arc pressure signal, air supply control and arc pressure output function makes it specially suitable for CNC and robot cutting;
8, Two machines parallel use is available, double the output current to cutting extra-thickness material well.